Features

Aerosol Generator2

For filter performance test, and particle counter calibration.
The air compressor is generated by clean air through 5um filter, 0.01um filter, adsorbent filter.
The clean air enters the atomizer through the membrane dryer and generates a Polydisperse Aerosol through the orifice in the atomizer.
The generated aerosol is released to the Aerosol Out through the water trap and the diffusion dryer.

Basic Aerosol Generator2 Kits

• Aerosol Generator2
• Air Compressor
• Silica gel 1kg
• Tube 1m
• 5um filter element

Warranty

Aerosol Generator2 includes free telephone technical support and a one-year limited warranty.

Fine spray

With 500mL Atomizer glass bottle
Precise injection is possible because the orifice is attached to the fine hole.

Use harmless Silica gel

Orange gel does not cause harmful Cobalt chloride when heated.

Can use various experiments

On / Off valve allows additional control of flow rate.


Aerosol generator2 composition diagram


Technical Specification


Menu

Aerosol 2

Flow Range(liter/min) 2~3
Maximum standard particle size(um) 2.0
Injection orifice diameter(mm) 0.35
Available particles Polystyrene latex sphere(PSL)
Average diameter of generated particles 0.35um water

Filter
B. Regulator Filter(5um)
C. Filter (0.01um)
D. Adsorber filter
Glass bottle capacity(mL) 500


Drier
Orange silica gel
- Size : 2~4mm
- Weight : 1kg
- Feature : 60% absorbed color turns dark green
     Dry in oven at 120 ° C for 3 hours
Relative humidity at discharge 20% when R.H 80%
Fitting outer diameter 1/2
Size(mm) 900(W) x 225(D) x 390(H)
Weight(kg) 11

Menu

Air Compressor

Maximum working pressure range (PSIG) 40
Flow Range(liter/min) 20
Nozzle Outer Diameter 12
Pump Type Piston pump
Pump Power 220V/ 60hz
Filter A. Pre Filter
Size (mm) 470(W) x 140 (D) x 210 (H)
Weight (kg) 4

    WORLD SHIPPING SERVICE

    PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE



  • GO